Konica Minolta KIP 9900 User Manual Download Page 18

Page: 18 / 139

Chapter 1 Before Use

1-10

Power Cord

Connect to the wall outlet alone.

WARNING

Plug Specification for Europe / Asia

The power cord plug must meet the followings.

(1) Select a plug which meets the following criteria.

•

The plug has a voltage and current rating appropriate for the product’s rating marked on

its name plate.

•

The plug meets regulatory requirements for the area.

•

The plug is provided with a grounding terminal.

(2) If the appropriate plug does not fit the wall outlet in the installation place, an appropriate

outlet must be prepared.

(3) The wires in the power cord must be connected to the terminals of the plug in accordance

with the following.

Wire Color

Plug Terminal

BROWN / BLACK

Marked with “L” / “A” / “W”, or colored RED

LIGHT BLUE / WHITE Marked with “N”, or colored BLACK

GREEN-AND-
YELLOW

Marked with “E” / “PE” / “ ”

or colored GREEN / GREEN-AND-YELLOW

NOTE

The above specifications are subject to change without notice.

Summary of Contents for KIP 9900












































































































































Search results

Summary of Contents for KIP 9900

Reviews:

Related manuals for KIP 9900

Brands by name

Popular brands

Konica Minolta KIP 9900, User Manual

Search results

Summary of Contents for KIP 9900

Reviews:

Related manuals for KIP 9900

Brands by name

Popular brands