Konica Minolta IC-301, User Manual, Page: 170 / 212

162 Appendix A– Setting Parameters
Right Binding
This check box is only available if the imposition method is either
saddle stitch or perfect bound, and the template is 2×1, 2×2, or
4×2
.
Spacing
Marks
¾
In the
Marks
list, select one of the following options:
•
Crop marks:
To print the lines that indicate where the sheet
should be cropped. To print the crop marks on both sides of
the page, select the
Both Sides
check box.
•
Fold marks:
To print the lines that indicate where the sheet
should be folded.
Bleed size
¾
Enter a value. The value that you enter depends on the paper
size and imposition method you choose.
When you set bleed options, you extend part or all of the printed
image beyond the trimming boundary. The bleed options ensure
that an inaccurate trim setting will not leave an undesired white
Notes:
•
If you want to use crop marks incorporated in the DTP
application, make sure that enough space is left around your
page in the PostScript file so that the page prints with crop
marks.
•
If your job already includes crop marks incorporated in the DTP
application, you do not need to add crop marks here. If you do
add crop marks, both sets of crop marks can be printed.
•
If you want to use crop marks incorporated in the DTP
application, make sure that enough space is left around your
page in the PostScript file so that the page prints with crop
marks.