9
EN
PUNCH G2
6. PROBLEM SOLVING
Problem
Probable Cause
No power, won’t punch
Power cord not attached to back
of machine or not properly
plugged into the wall.
Power
On/Off
Switch
not
activated.
Punched holes not aligned with
the edge of the paper
Follow instructions on die set
labels to properly configure the
die for a specific sheet size.
Sheet jamming repeatedly at die
set area.
Remove the die-set, inspect the
die throat to see if there is any
stuck paper chad.
Insert Chip tray message on the
LCD interface.
Make sure the Chip tray is fully
inserted.
7. SPECIFICATIONS
Speed
Up to 136 sheets per minute
Punch Sheet Size and
Edge
LEF- Long Edge Fed
SEF- Short Edge Fed
Tab Stock
US Sizes
LTR LEF
LTR SEF
LTR SEF Double Punch
Statement LEF
Legal SEF
Ledger SEF
Ledger SEF Double Punch
ISO sizes
A4 LEF
A4 SEF
A4 SEF Double Punch
A5 LEF
A3 SEF
A3 SEF Double Punch
US Sizes
LTR, with 3,4,5,8 and 10 tabs
Statement, with 3 and 5 tabs
ISO Sizes
A4, with 5 and 10 tabs
A5, with 3 and 5 tabs
Paper Stock
Clear Cover
Plain: 75gsm - 300gsm
(20# bond to 110# cover)
Coated: 120gsm - 300gsm
(32# bond to 110# cover)
7mil
Bypass mode stock and
sizes
Paper sizes and stocks same as
printer
Punch Capacity
Single Sheet
Power Supply
115V, 60Hz, Single Phase
230V, 50Hz, Single Phase
Electrical
Amps and
Frequency
115V; 3.8A; 60Hz (or)
230V; 1.9A; 50Hz
Safety Certification
cULus
Dimensions
L: 775mm; W: 445mm; H: 1020mm
L: 30.5"; W: 17.5"; H: 40.2"
Weight
95 kg
210 lbs
Shipping Weight
123 kg
272 lbs.
Manufactured
Assembled in Taiwan
