E-13
(5) Incline the guide plate assy shown in the illustra-
tion and adjust the skew.
Note:
Incline the guide plate assy forward or backward
according to the deviation of the crease.
[If the crease deviates as shown below]
Incline the guide plate assy backward.
[If the crease deviates as shown below]
Incline the guide plate assy forward.
(6) Tighten the four screws loosen in steps (3) and
(4).
<Half-fold position adjustment>
(1) Unfold the paper that exits the machine and lay
the paper with the ridge facing up.
(2) Fold the paper shown in step (1) in half and
unfold it again.
(3) Check the crease for deviation
(Measure width A).
Reference: 0 ± 1.0 mm
Guide plate assy
Crease
Crease
Exit direction
A
Crease produced in step (2)
Crease
