manualshive.com logo in svg

Konica Minolta FS-534, Installation Manual

The Konica Minolta FS-534 is a professional-grade multifunction printer with advanced features. For easy set-up and hassle-free operation, we offer a comprehensive Installation Manual. Visit our website to download this valuable manual for free and unlock the full potential of your device.

Share
Download
background image

E-12

39. Remove the cover shown in the illustration from 

the back of the main unit. (One screw)

40. Plug in the two connectors of the finisher. Fit the 

head of the cable tie into the mounting hole on 
the main unit.

41. Attach the supplied wire saddle to the location of 

the finisher as shown in the illustration. 
Route the harness of the finisher through it.

Note:

Perform this step only when installing the finisher 
to C554/C454/C364/C284/C224.

A3EPIXC046DA

<When installing this option to C754/C654>

<When installing this option to 

C554/C454/C364/C284/C224>

A3CFIXC008DA

A3EPIXC047DA

<When installing this option to C754/C654>

<When installing this option to 

C554/C454/C364/C284/C224>

A2YUIXC022DA

Connector

Cable tie

Connector

Cable tie

A3EPIXC056DA

Wire saddle

Summary of Contents for FS-534














Reviews:

No comments

Related manuals for FS-534

BINDOMATIC 301 DFS Operator'S Manual preview
301 DFS
Brand: BINDOMATIC Pages: 84

Brands by name

Popular brands

Load more brands