E-7
14. Connect the sensor unit’s connector to the con-
nector of the harness removed in step 10.
15. Route the harness through the two wire saddles
and the edge cover.
16. Attach the mounting bracket F to the mounting
bracket C. (One supplied screw D)
17. Attach the mounting bracket G to the mounting
bracket D. (One supplied screw D)
18. Reattach the cover removed in step 9 to the
main unit. (Two screws removed in step 9)
19. Remove the protective tape of the horizontal
transport unit.
20. Attach the supplied mounting bracket C (front) to
the left side of the main unit. (Two supplied
screws C)
A2YVIXC013DA
A2YVIXC014DA
A3EPIXC053DB
A3EPIXC054DB
A3EPIXC014DA
A3EPIXC015DA
