E-4
9. Install the mounting bracket B (left) and mounting
bracket C (right) shipped with the finisher to the
lower portion on the left side surface of the
machine (four screw B’s furnished with the fin-
isher).
Note:
Install mounting bracket C such that the threaded
hole at the center in the bracket is on the right-
hand side.
10. Remove the locking tapes and the locking pro-
tection materials from the front door and the left
side of the finisher.
11. Remove the locking tapes from each guide
plates.
12. Remove the stacker locking materials.
13. Pull out the stacker and remove the locking
tapes. Remove the locking material (three
places) from the inside of the stacker (eight
screws).
A07UIXC008DB
Threaded hole
A07PIXC005DA
A07PIXC001DA
A07PIXC002DA
A07PIXC006DA
