Konica Minolta FS-505, User Manual

Page: 47 / 50

Copy operations 2
Finisher FS-505 2-19
2.3 Using finisher manually
The Finisher FS-505 with Cover Sheet Feeder PI-501 installed can be
operated manually, using the operation panel provided on the Cover Sheet
Feeder.
Place a set of paper into the lower tray. Upper tray cannot be used.
Available finishing modes according to the optional configuration are
described below.
- Finisher FS-505 + Cover Sheet Feeder PI-501
– Staple (Corner staple / 2 position staples)
- Finisher FS-505 + Cover Sheet Feeder PI-501 + Punch kit PK-504/505
– Staple (Corner staple / 2 position staples)
– Punch
2
Reminder
The Z folding unit ZU-601/602 cannot be used for manual punch. To use
Punch mode manually, Punch kit PK-504/505 is necessary.
Paper size Staple capacity Output tray
Specifications
for Staple (Cor-
ner staple / 2 po-
sition staples) A3, B4, A4, A4R, B5, A5, 11"×17",
8.5"×14", 8.5"×11", 8.5"×11"R (60 to
80 g/m
2
)
50 sheets or less Primary (main)
tray
Specifications
for Punch A3 to A5 (60 to 128 g/m
2
) 200 sheets or
less Primary (main)
tray
Start/Stop button
Corner staple
2 position staples Punch