Konica Minolta FS-505, User Manual

Page: 37 / 50

Copy operations 2
Finisher FS-505 2-9
Stapling copies (Staple settings)
!
Detail
There are two types of staple cartridges for finisher FS-505. The 50-sheet
staple cartridge can staple up to 50 sheets. The 100-sheet staple
cartridge can staple up to 100 sheets. Specify the number of copies
according to the paper size, stapling method and number of sheets
stapled, and then adjust the number of sheets loaded in the main tray.
In order for the copies to be stapled, all of the following conditions must
be met.
There are four Foolscap sizes: 8-1/4 × 13" w , 8-1/8" × 13-1/4" w , 8-1/2"
× 13" w and 8" × 13" w . Any one of these sizes can be selected. For
details, contact the service representative.
If the "Mixed Original" setting is selected, all copies must have the same
paper width.
If a Staple setting is selected, the "Sort" setting is automatically selected.
A Staple setting cannot be used together with the "Offset" setting.
If a Staple setting is to be selected, select the orientation in which the
original is positioned and the orientation of the page to be stapled,
otherwise the copies may not be stapled as desired.
For details on specifying the original orientation, refer to Copy Operations
of the user manual.