E-15
9. Install the main tray on the main tray up-down
portion on the FS-503 (Truss screw M4x6: 2 pcs.)
Note:
When installing the main tray, hook the main tray
guide holes to the four auxiliary metal hooks and
secure the tray.
10. Plug in the power cord.
(COLOR MFP 65ppm series only)
Connect the power cord to the RU-504 and plug
it into the outlet. (included in the machine pack-
age)
11. Perform a software update (ISW).
(MFP 105ppm series only)
For ISW procedures, see the service manual.
Note:
The software is designed for the COLOR MFP
65ppm, so be sure to run it.
* For the installation procedure for the RU-504,
see the RU-503/504 installation manual.
1. Turn OFF the machine's Sub and Main power
switches, and unplug the power cord.
2. Install the Installation plate/1 (2 places), the
Installation plate/2, and the Installation plate/3 on
the left side of the SD-501 as below. (TP screw
M4x6: each 2 pcsx4 places.)
Note:
For the Installation plate/2 and the Installation
plate/3, use the screw holes with the engraved
marking “FS503”.
3. Remove the back cover of the FS-503 (5 screws).
(MFP 105ppm series only)
15AEIXE017SA
Main tray
Truss screws M4x6
15AEIXE064SA
FD-501
RU-504
Machine
Power cord
Installation procedure for
[FS-503 + SD-501 + (FD-501+) MFP 105ppm series]
[FS-503 + SD-501 + (FD-501+) RU-504
+COLOR MFP 65ppm series]
Installation plate/1
Installation plate/2
Installation plate/3
Engraved marking FS503
Engraved marking FS503
15AEIXE032SA
15AEIXE019SA
Back cover
