Konica Minolta EK-611, Installation Manual, Page: 6 / 6

E-6
3. Configuration procedures
<Setting the bluetooth>
(1) Plug the power cord into the power outlet and
turn ON the power switch.
(2) Display the Service Mode screen.
(For details of how to display the Service Mode
screen, see the service manual.)
(3) Select “System 2” → “ ” → “Local Interface Kit
Setting.”
(4) Touch “Set.”
(5) Touch “END.”
(6) Touch “Exit” on the Service Mode screen.
(7) Turn OFF and ON the power switch.
Note:
When displayed the Service Mode screen, be sure
to turn off the power after exiting the Service Mode
screen and wait for 10 seconds or more before
turning on.
(8) Press [Menu] key.
(9) Touch “Utility.”
(10) Touch “Administrator Settings.”
(11) Enter the administrator password and then
press “OK.”
(12) Select “System Connection” → “Mobile Con-
nection Settings” → “Simple Connection Set-
ting” → “Enable Bluetooth LE.”
(13) Select “ON” and touch “OK.”
(14) Touch “Close” twice.
(15) Select “User Authentication/Account Track”
→
“General Settings” → “ ↓ ” → “ ↓ .”
(16) Touch “Enable Bluetooth LE” and set “ON.”
(17) Set “Bluetooth LE Authentication Setting” to
“ON.”
(18) Touch “OK” twice and touch “Close” three
times.