E-4
(19) Connect the harness removed in step (14) to
the local interface board unit and fit the harness
into the wire saddle.
(20) Fit the USB cable connected in step (17) and
the harnesses connected in step (18) and (19)
into the edge cover.
(21) Install the local interface board unit to the main
body. (Three supplied screws)
Note:
Be sure that the harness does not get caught.
(22) Fit the harness connected in step (19) into the
wire saddle.
(23) Fit the harness connected in step (18) into the
edge cover.
(24) Connect the connector.
(25) Reattach the covers and other parts removed in
steps (11) to (12) by reversing the removal pro-
cedure.