22
Chapter
2
Basic Recording
Recording
Holding the camera
●
Hold the camera securely in both hands with
the elbows pressed against the body for
stable positioning.
●
When using the flash with the camera held
sideways, hold the camera so the shutter
button is at the top.
* Take caution not to cover the flash or lens with
fingers or strap.
Viewfinder and LED
To focus during viewfinder recording, fit the sub-
ject within the entire viewfinder, and align the sub-
ject to focus within the section with the diagonal
lines of the [
] located approximately at the cen-
ter of the viewfinder.
For macro recording (0.25m to 0.8m), or if the
zoom position is set to TELE and the distance
between the camera and subject is near, record
with the LCD monitor set to ON since the
viewfinder and the recording range will vary. For
macro recording, see page 32.
Definitions of viewfinder LED display statuses on the right of the viewfinder are shown below.
Use them as references during operation of the camera.
LED display
Status
Definition
Warning sound
Red
Flashing System error (error code displayed on status LCD)
Yes
Red
Flashing Image blur warning, Low light warning
No
Red
On
Flash charging
No
Green
Flashing Auto-focus (AF) unavailable*
No
Green
On
Camera ready for recording
No
Red and green
Flashing Camera unstable warning, low-luminance warning
or when subject cannot be focused (AF)
Yes
Red and green
Flashing Insufficient card space, or card is not inserted,
damaged, unformatted or write-protected
No
Red and green
On
Formatting card or during process
No
Finder LED
Focus area
Summary of Contents for Digital Revio KD-210Z
Page 81: ...81 Appendix 8...
Page 82: ...82...