Konica Minolta Digital Revio KD-210Z, User Manual, Page: 18 / 82

18
q
w
w
Inserting/Removing the SD Memory Card/Multi-Media Card
Application and handling of the SD Memory Card/Multi-Media Card
●
Other than saving recorded images, SD Memory Card/Multi-Media Card can also be used
for data transfer to a PC (see Chapter 7 “Installing the Software and Transferring Images to
a PC” (page 69)). For handling instructions, see “About the SD Memory Card/Multi-Media
Card” (page 9).
Preparation
●
Check to make sure that the main switch is set to the OFF position. Damage may occur to
the camera and/or SD Memory Card/Multi-Media Card if the power is on.
Inserting the card
q
Open the battery/card cover.
w
Face the label of the SD Memory Card/Multi-
Media Card toward the front of the camera
and securely insert into the camera with the
mark on the label facing up until a click is
heard.
The card will be locked.
e
Close the battery/card cover.
* SD Memory Card cannot be inserted and
locked if the front/back sides or the up/down
direction are incorrect.
* Mutli-Media Card will lock with the card ejected
if the front/back sides or the up/down direc-
tion are incorrect and the battery/card cover
will not close.
* If force is used when inserting SD Memory
Card/Multi-Media Card, damage may occur to
the connector section.
Removing the card
q
Open the battery/card cover.
w
Press in the inserted SD Memory Card/Multi-
Media Card.
The card will unlock and eject. (Push-Push
system)
BATT./CARD
OPEN
w
q