Konica Minolta Digital Revio KD-210Z, User Manual, Page: 17 / 82

17
Pr
eparation
1
q
w
Battery life guide (reference)
Recording (LCD monitor on) Recording (LCD monitor off) Continuous playback
AA alkaline batteries About 130 images About 260 images About 65 minutes
AA nickel-hydrogen batteries About 200 images About 400 images About 75 minutes
CR-V3 lithium battery About 500 images About 1250 images About 300 minutes
* Under Konica test conditions (room temperature, normal humidity; picture quality: Super Fine mode; flash: one
full flash in two image recordings; recording operation: continuous recording at 20 sec intervals; zoom opera-
tion: single way for every image recorded)
Note:
* Battery life varies according to the brand and grade.
* Use new batteries.
* The above values are reference values and are not guaranteed. Especially for alkaline batteries, the above
value may decline by half depending on the condition of the used batteries. (See page 11)
* Battery life may decline from bad contact when there is oil or grease on the polarity of the batteries. Always
wipe batteries with a soft, dry cloth before use.
* Do not touch contact parts since the batteries life may decline from bad contact when there is oil or grease on
the battery cover or metal parts within the battery compartment. If a contact part is accidentally touched or
there is decline in battery life, always wipe with a soft, dry cloth before use.
* Power is consumed by the following operations even when not recording and these will reduce the number of
images that can be recorded.
• Repeated focus operations by pressing the shutter button halfway.
• Repeated zoom operations.
• Extensive use of the LCD monitor in the Playback mode.
• Communication with a PC.
* Do not use new batteries with old ones.
* Do not use a mix of different types, different manufactures, different classifications of batteries.
* Do not use rechargeable batteries with substantially different charge status.
Warning: When you continue using the camera
for a long time, the batteries become
hot. Contact with the batteries can lead
to burns.
AC adapter (optional)
●
Insert the AC adapter into a wall outlet of
100V AC ( 1 ). Next, connect the power
cable of the AC adapter into the AC adapter
jack on the camera ( 2 ).
Handling the AC adapter
●
Be sure to read the “Safety Precautions” in this
manual (pages 6, 7 and 8).
●
Always use the specified AC adapter (DR-AC2).
Otherwise fire and/or electrical shock may oc-
cur as a result.