Konica Minolta CS-7, Operation Manual

Page: 279 / 424

279
7.9 SIGMA stitching exposure
Chapter 7
IMPORTANT •••••••••••••••••••••••••••••••••••••
• If the image rotation settings have not been specified
with the SIGMA stitching Exam. Tags, rotate the im
-
ages before combining them .
•••••••••••••••••••••••••••••••••••••••••••••••••••••
HINT
•••••••••••••••••••••••••••••••••••••
• You can also specify the reading sequence in the or-
der list . Set the upper stage of the Reina buckies for
the first exposure, and then press the exposures se -
quentially .
• If you press the exposure conditions display area
where the reading sequence of the examinations is
specified, the specified reading sequence is cancelled.
•••••••••••••••••••••••••••••••••••••••••••••••••••••
7 .9 .3 Image combination
You can automatically or manually combine the stitch-
ing images exposed using the Reina buckies. The fol -
lowing procedure describes an example of combining
3 images .
IMPORTANT •••••••••••••••••••••••••••••••••••••
• If SID is 1 .7m or less, it may be necessary to adjust
the combination positions manually .
• Adjust the combination position by using the markers
as supplementary standards in addition to body parts
of the subject .
It is also recommended that you arrange the measure
in the combined image part during exposure to sim -
plify the confirmation of the combined parts.
• In stitching exposure, when plates overlap and are ar -
ranged so that there is no image loss in each plate's
boundaries, there might be a slight gap in the marker
position because of a minute difference in magnifica -
tion. After taking this into account, confirm the combi -
nation position through the marker .
•••••••••••••••••••••••••••••••••••••••••••••••••••••
1
Select the images to be combined .
• Select the images to be combined from the or-
der list and press [ ] or [ ].
• The selected images are displayed in the com-
bined image display area .
• If you pressed [ ], continuously select the
associated images (second and third) .
HINT •••••••••••••••••••••••••••••••••••••
• [ ] and [ ] can be pressed only when the set
key for stitching exposure has been selected.
•••••••••••••••••••••••••••••••••••••••••••••••••••••