2/27/2020 5:45 PM
／
D11
26
30
Return the tray to its original position,
then withdraw it again after the bottom
plate of the tray goes up completely.
The sound of motor elevating the bottom plate can be
heard when the tray is returned in position. After that
automation is completed, again withdraw the tray
to find that the bottom plate has been elevated to the
top position.
NOTICE
Be sure not to withdraw the tray till the motor
sound stops. Otherwise, the later operation may
be affected because the bottom plate is not
elevated completely to the top.
31
Adjust the position of the top edges of the
side guide plates.
Move top edges of the side guide plates to align
them to the paper, then turn the two side guide
fixing knobs clockwise to fix the guides.
NOTICE
Avoid making the gap between the side guide
plates too wide or too narrow for the paper to
be seated straight.
32
Lower the bottom plate of the tray.
Turn the bottom plate fixing knob counterclockwise
to loosen it, slide it to the back, and turn it clockwise
to fix the plate.
The bottom plate automatically goes down.
