Konica Minolta CM-23d, Instruction Manual

Page: 32 / 151

29
„
Optional settings
„
Basic procedure
„
Simple measurement
Turning the Power ON (P.32)
Turning the Power ON
(P.32)
↓
Language selection (
P.100) * As necessary (after initialization, etc.)
↓ ↓
Measurement cond. setting (
P.89)
Skip the initial
calibration screen
↓
Zero calibration (
P.34)
* Only when required (when changing
the measurement conditions, etc.)
↓
White calibration (
P.36)
↓
↓ ↓
When “Change to
simple mode?” appears,
select “Yes”
* When color difference is
measured
* When color difference
is not measured
↓
Color difference target settings
( P.39)
(Procedure)
(1) Open the <Target>
screen.
(2) Select the target number.
(3) Measure the color
difference target.
↓ ↓
Pass/fail judgment criteria settings
(
P.67)
Measurement
(Simple mode) ( P.46)
↓ ↓
Measurement (
P.39)
(Procedure)
(1) Open the <Sample> screen.
(2) Measure the sample.
↓ ↓
End End
* Configure measurement/
observation conditions
and perform calibration
as necessary.
Flow of Measurement