Konica Minolta CM-23d, Instruction Manual

Page: 49 / 151

46 45
Measur
ement
2
„
Measurement (Simple Mode)
Used to easily confirm color differences. The menu items that can be use in Simple mode are as follows.
The following setting conditions can be changed.
[Mesurement cond.] - [Measurement setup] -[Specular Component]
-[Auto average]
-[Manual average]
-[Manual average option]
- [observer/Illuminant] - [observer/Illuminant1]
- [observer/Illuminant2]
- [Display cond,] - [Color space]
-[Equation]
Setting Procedure
1
Set to “Simple mode”.
Press [ESC] to skip the calibration displayed
immediately after turning the power ON. Set “Simple mode” under <Setting> - <Instrument
Mode>.
2019/11/19 08:44:31
2019/11/19 09:41:33
Zero calibration date
White calibration date
Calibration
Calibration
(Excluding Zero Cal.)
Calibration
(Including Zero Cal.)
Warning
Change to simple mode?
Yes No
When “Change to
simple mode?” appears
on the screen, select
“Yes”.
or
Press the
[Target/Sample]
button
or the [ESC]
button to switch
to the Simple
Measurement
screen.
2
Measuring a target: Absolute value measurement
Press the measurement
button.