Konica Minolta CM-23d, Instruction Manual, Page: 35 / 151

32 31
Measur
ement
2
„ Connecting the AC Adapter
Notes
• The lithium-ion battery must always be installed, even when using external power.
• To supply AC power to the instrument, always use the AC adapter (AC-A305J/L/M) supplied with the
instrument.
• Firmly push the AC adapter power plug or USB cable completely into the outlet.
Memo
Powering the instrument from the USB cable will charge the installed lithium-ion battery. While the battery is charging,
the charging lamp on the instrument’s panel will light up orange. When charging is complete, the lamp will turn green.
Operating Procedure
1
Open the connector’s protective cover, and connect
the USB cable to the USB port on the instrument.
2
Connect the USB cable to the AC adapter, and then
connect the AC adapter plug to a 100 to 240 VAC
(50/60 Hz) power outlet.
„ Turning the Power ON/OFF
Operating Procedure
Turning the Power ON
1
With the power OFF, press and hold the power
switch for about 1 second.
The power will turn ON.
Notes
• When first turning the instrument ON after purchasing,
the language setting screen will be displayed, followed
by the date and time setting screen. Configure the
settings according to P.100 and P.101.
Operating Procedure
Turning the Power OFF
1
Press and hold the power switch for about 1 second.
The power will turn OFF after the settings have been
saved.
Memo
When powered by the battery, the instrument will turn
OFF automatically after 5 minutes of inactivity.
Due to data protection within the instrument, powering
down may take several seconds to several tens of
seconds.