4-3
4.1
Loading Paper
Loading paper into the Paper Feeder Unit PF-602m
The following describes how to load paper into an optional
Paper Feeder Unit PF-602m
. The same paper loading
procedure is used for
Tray 3
and
Tray 4
.
Reference
For information about how to load paper into other optional paper feeder unit, refer to the
HTML User's Guide
.
A
Pull out the tray to load paper into.
NOTICE
NOTICE
Trays can be pulled out only when this machine is turned on. Before
pulling out the target tray, check that the
sub power switch
is turned
on.
In order to prevent the machine from falling down, only one tray can
be pulled out at a time.
B
Turn the
side
guide lock knobs
(4 pieces)
counterclockwise to loosen them.
C
While pressing the
side guide lock release lever
(
), slide the
side guide plates
to any positions
(
).
Determine their locations based on the size indicator of the
bottom plate of the tray.
NOTICE
NOTICE
To slide the
side guide plates
, be sure to hold both
side guide
plates
together. If you move it by holding only either of the
side guide
plate
, the
side guide plate
that held may become displaced.
D
While pressing the
rear guide lock release lever
,
slide the
rear guide plate
to any positions.
Determine their locations based on the size indicator of the
bottom plate of the tray.
E
To fix the
side guide plates
at the correct locations, load an appropriate amount of
paper into the tray while aligning it to the left-hand side of the tray.
NOTICE
NOTICE
Load paper with the print side facing up.
F
Press the
side guide plates
against paper, then turn the
side
guide lock knobs
(4
pieces) clockwise to fix them.
