1-8
1.1
Turning the Power ON/OFF
)
Power-saving function
Using the following functions can reduce the power consumption of this machine and provide greater power-saving
effects.
Tips
-
Utility/Counter
- [Administrator Setting] - [System Setting] - [Power Save Setting] - [Power Save Function
Setting] is the same as
Utility/Counter
- [User Setting] - [System Setting] - [Power Save Setting] - [Power Save
Function Setting], use either of the methods to configure a setting.
-
If
Power Save
on the
control panel
is pressed for one second or more, either of Auto Low Power or Auto Shut
OFF is enabled. To enable either function, select [Administrator Setting] - [System Setting] - [Power Save Setting]
- [Power Save Function Setting].
Reference
For details about how to configure and use the above functions, refer to the
HTML User's Guide
.
NOTICE
NOTICE
If this machine is turned off because the Weekly Timer has started, job data is not received even if it is sent. While this
machine can be used normally, send job data again.
Function
Description
Power Save func-
tion
Auto Low Power
Turns off the
touch panel
display to reduce the power consumption
of this machine. This machine is placed into the Auto Low Power
mode when:
•
The specified period of time has elapsed with no print jobs exe-
cuted in the printable state
•
Power Save
on the
control panel
has been pressed for a sec-
ond or more
This mode is available when [Auto Low Power] is selected by select-
ing
Utility/Counter
- [Administrator Setting] - [System Setting] -
[Power Save Setting] - [Power Save Function Setting].
There are eight power-saving time periods available: 5 min., 10 min.,
15 min., 30 min., 60 min., 90 min., 120 min. and 240 min., from which
you can select the desired one.
Power-saving time periods, 90 min., 120 min., and 240 min., may not
be displayed depending on regions.
Auto Shut OFF
Turns off all LEDs except
Power Save LED
and
Power LED
on the
control panel
, to reduce the power consumption of this machine.
This machine is placed into the Auto Shut OFF mode when:
•
The specified period of time has elapsed with no print jobs exe-
cuted in the printable state
•
Power Save
on the
control panel
has been pressed for a sec-
ond or more
If the Auto Shut OFF mode is kept for a long time, it may take a while
to warm up this machine upon restart.
This mode is available when [Auto Shut OFF] is selected by selecting
Utility/Counter
- [Administrator Setting] - [System Setting] - [Power
Save Setting] - [Power Save Function Setting].
There are seven power-saving time periods available: 0 min., 1 min.,
30 min., 60 min., 90 min., 120 min., and 240 min., from which you
can select the desired one.
ErP Setting
Turns the main power off after the Auto Low Power mode, Auto Shut
OFF mode, or the
sub power switch
is kept in the off state for the
specified period of time.
There are seven power-saving time periods available: Do Not
Switch, 12 Hours, 24 Hours, 36 Hours, 48 Hours, 60 Hours, and 72
Hours, from which you can select the desired one.
If the Weekly Timer is set to [Weekly Timer ON], [ErP Setting] ap-
pears dimmed and you cannot configure this setting.
Monochrome Energy-save Mode
For monochrome printing, you can carry out it in energy-save mode.
Weekly Timer
Automatically turns the power of this machine on or off based on the
specified time or day of the week.