Konica Minolta bizhub 40p, Service Manual

Page: 153 / 431

9. Menu Field Service V er. 1.0 Dec. 2007
118
bizhub 40P
Adjustment / Setting
9.8.7 ENERGY SAVER TIME
9.8.8 MENU TIMEOUT
9.8.9 LCD CONTRAST
9.8.10 SECURITY
A. CHANGE PASSWORD
Function • Sets the amount of time before the machine enters energy saver mode after the last
print is received or the last key operated.
Use • To change the amount of time before the machine enters energy saver mode.
Setting
/procedure • The default setting is 5 minutes.
5 minutes/6 minutes/7 minutes/8 minutes/9 minutes/10 minutes/11 minutes/12 minutes/
13 minutes/14 minutes/15 minutes/30 minutes/1 hour
Function • Sets the amount of time before the control panel returns to the status screen from
menu mode and the help display.
Use • To set the amount of the time before the control panel returns to the status screen
from the menu and the help display.
Setting
/procedure • The default setting is 2 minutes.
OFF 1 minute “2 minutes”
Function • Sets the brightness of the control panel LCD display.
Use • To set the brightness of the control panel LCD display.
Setting
/procedure The default setting is 0.
-3 -2 -1 “0” +1 +2 +3
Function • Sets the password used for the lock panel function.
Use
• To change the password used for the lock panel function.
0000 : Panel lock function is OFF.
0001 to FFFF : V alid password for panel lock function.
Setting
/procedure 1. Select [CHANGE PASSWORD] and press the Menu/Select key.
2. Set desired password (first digit) with the up key
U
/down key
V
and press the right
key
Z
.
3. Repeat the above procedures to set up to fourth digit password.
• The default setting is 0000.
“0000” to FFFF
NOTE
• Make sure to set the password to something other than “0000” when the
[LOCK PANEL] function is set to [ON].
• If you forget the password, it can be initiated (0000) with [SERVICE MENU/
RESTORE PASSWORD].
See P.143