Konica Minolta bizhub 40p, Service Manual

Page: 136 / 431

Field Service V er. 1.0 Dec. 2007 9. Menu
101
bizhub 40P
Adjustment / Setting
(3) PAPER TYPE
(4) SIZE SETTING
E. TRAY CHAINING
F. TRAY MAPPING
(1) TRAY MAPPING MODE
(2) LOGICAL TRAY0-9
Function • Sets the media type for tray 3/4.
Use • To specify the type of media loaded in tray 3/4.
Setting
/procedure 1. Select [PAPER TYPE] and press the Menu/Select key.
2. Select desired paper type and press Menu/Select key.
• The default setting is PLAIN PAPER.
ANY/PLAIN PAPER/RECYCLED/THICK 1/THICK 2/THICK 3/LABEL/TRANSPAR-
ENCY/EN
V ELOPE/POSTCARD/THIN PAPER
NOTE
• ANY identifies any media type.
Function • Selects whether the paper size of tray 3/4 is to be detected automatically or manually.
Use • To load paper of a size that cannot be detected automatically.
Setting
/procedure • The default setting is “AUTO.”
“AUTO” USER SELECT
Function • Sets auto tray switching.
Use • To specify that the printer should pull media from another tray when the specified tray
runs is empty.
Setting
/procedure • The default setting is “ON.”
“ON” OFF
Function • Selects whether or not the tray mapping function is used.
Use • To specify whether trays are mapped.
Setting
/procedure • The default setting is OFF.
ON “OFF”
Function • Specifies whether jobs received from another manufacturer’s printer driver are
printed using tray 1 to tray 4.
Use • To specify the media source for print jobs using another manufacturer’s printer driver.
Setting
/procedure • Only the default for LOGICAL TRAY 2 is PHYSICAL TRAY 2. PHYSICAL TRAY 1 is
the default for all trays other than LOGICAL TRAY 2.
PHYSICAL TRAY 1 PHYSICAL TRAY 2
PHYSICAL TRAY 3 PHYSICAL TRAY 4
NOTE
• Only the mounted tray can be selected.