Konica Minolta AU-211P, User Manual, Page: 42 / 52

AU-211P 3-26
3.8 Scan To Me 3
3.8 Scan To Me
3.8.1 Overview
Scan To Me is a function that sends scanned data to the user’s e-mail address.
This function is effective when frequently sending scanned data to the user’s address.
Using this function, the user can obtain the authenticated user’s e-mail address using the LDAP protocol to
easily send data to the obtained address. The user can also encrypt an e-mail using the PKI card or add a
digital signature when sending an e-mail, ensuring higher level security.
1. Insert the PKI card into the MFP to perform Active Directory authentication.
2. Obtain the user’s e-mail address.
3. Send an e-mail to the user's e-mail address. If necessary, encrypt an e-mail or add a digital signature
using the PKI card.
4. Move to the computer while holding the PKI card.
5. Insert the PKI card into the computer to perform Active Directory authentication.
6. Receive an e-mail. After you have encrypted an e-mail or added a digital signature when sending the
e-mail, decrypt the e-mail and check the signature using the PKI card.
Tips
This function is not available when you log in to the MFP as a public user, administrator, administrative user,
or User Box administrator.
(2)
(1)
(3)
(4)
(5)
(6)
PKI Card
E-mail
Active Directory
PKI Card
Send to the user’s address