Konica Minolta AU-211P, User Manual, Page: 10 / 52

AU-211P 2-4
2.3 Pre-Setting 2
2.3 Pre-Setting
To use this system, pre-configure the following settings on the MFP.
- Configuring Network Settings (p. 2-4)
- Registering Active Directory for Authentication (p. 2-6)
-
Adjusting the MFP Time (p. 2-6)
- Registering the DNS Server Associated with Active Directory (p. 2-7)
- Setting PIV Transitional Mode (p. 2-7)
- Configuring Settings for Verifying the Active Directory Certificate (p. 2-8)
- Setting the Power Saving Mode (p. 2-9)
2.3.1 Configuring Network Settings
Configure the basic settings required to use the MFP in network environment.
[TCP/IP]
Select [Utility] - [Administrator] - [Network] - [TCP/IP Setting] - [TCP/IP Setting1], and set [TCP/IP] to ON
(default: ON).
[IPv4]
Select [Utility] - [Administrator] - [Network] - [TCP/IP Setting] - [TCP/IP Setting1] - [IPv4], and configure the
following settings.
[IPv6]
Select [Utility] - [Administrator] - [Network] - [TCP/IP Setting] - [TCP/IP Setting1] - [IPv6], and configure the
following settings.
Item Description
[IP Address Setting Method] Select the method to specify the IP address of the MFP depending on
your environment (default: [Auto Setting]). To manually specify the IP ad-
dress, select [Manual Setting]. To automatically specify the IP address
using DHCP, select [Auto Setting], and specify the automatic setting
method.
[IP Address] Enter the fixed IP address assigned to the MFP when manually configur-
ing the setting.
[Subnet Mask] Enter the subnet mask when manually configuring the setting.
[Default Gateway] When directly entering the IP address, specify the default gateway of the
network to be connected.
Item Description
[IPv6] When using IPv6, set this option to ON (default: ON).
[Auto IPv6 Setting] When automatically specifying the IPv6 global address, set this option to
ON (default: ON). The IPv6 global address is automatically set based on
the prefix length notified from the router and the MAC address of the
MFP.
[DHCPv6 Setting] When automatically specifying the IPv6 global address using DHCPv6,
set this option to ON (default: ON).
[Link-Local Address] Displays the link-local address. The link-local address is automatically
specified from the MAC address of the MFP.
[Global Address] Enter the IPv6 global address when manually configuring the setting.
[Prefix Length] Enter the prefix length of the IPv6 global address between 1 and 128
when manually configuring the setting.
[Gateway Address] Enter the gateway address when manually configuring the setting.