Konica Minolta AccurioPress C3070, Quick Manual

Page: 19 / 72

AccurioPress C3080/C3080P/C3070, AccurioPrint C3070L 2-9
2.1 Turning the Power ON/OFF 2
Tips
The Image Controller IC-313 can reset Fiery software or restart the entire system as needed.
- To reset only the Fiery software, press the Menu button on the control panel, then use the row selection
button to select [Restart Server] - [Restart Server] in sequence. In this case, do not reboot the Windows
operating system.
- To reboot the entire system including the Windows operating system, press the Menu button on the
control panel, then use the row selection button to select [Restart Server] - [Reboot System] in se-
quence.
-
You can set the Image Controller IC-313 to turn on or off at the same time when the power of the main
body is turned on or off. For details, refer to the User's Guide for the Fiery Color Server .
Turning the power off (Image Controller IC-314)
1
Turn off the sub power switch .
The touch panel display is cleared, and the Power LED on
the control panel is changed from blue to orange.
NOTICE
While the following message is displayed, do not turn off the
main power switch . Otherwise, a problem such as a toner fix-
ation in the machine may occur.
[Cooling in progress / Power is turned off automatically]
[Power off in progress / Please do not turn the main power off]
2
Turn off the main power switch .
NOTICE
When turning the main power switch off then on, be sure to
wait for 10 seconds or longer before turning the main power
switch on again. If the
main power switch is turned on again
within 10 seconds, the machine may not function normally.
3
From the [File] menu in [workspace], select [Exit].
4
Click [Yes].
5
Check that the [IC-314 print controller icon] has disappeared from the taskbar, and then shut down
[Windows].
OFF
ON
OFF ON