Konica Minolta 0404, Installation Manual

Page: 40 / 48

3.1 Flow of System Connection and Operation Check
3-2
3.1 Flow of System Connection and Operation Check
This section describes the workflow from connecting to the system, checking operations, and handling
over the machine.
Item Outline
Connecting System Follow the procedure described below to connect the unit to the system.
1. Upgrading REGIUS console, when the REGIUS console application
does not support the unit
2. Setting Up Network
3. Connecting to Network
For further details, refer to “3.2 Connecting System” and the REGIUS
console Installation/Service Manual.
Setting Up REGIUS
Console Set up the REGIUS console.
The settings related to the unit are as follows:
•
System (reader) configuration setting (Configuration setting for the
reader to be connected)
•
Cassette reader information setting (Network information setting for
the reader to be connected)
For further details, refer to the REGIUS console Installation/Service
Manual.
Checking Operations and
Backing Up Setup Data Check whether the unit operates in the system to read images
successfully.
It the machine operates successfully, back up the unit setup data in the
REGIUS console.
For further details, refer to
“3.3 Checking Operations and Backing Up
Setup Data” and the REGIUS console Installation/Service Manual.
Handing Over Check whether the unit is free from dirt and hand it over.
For further details, refer to
“3.4 Handing Over” .
0404YF220A.book 2 ページ ２００９年８月２０日 木曜日 午後１時２６分