13
Operation
Coupling
Attention!
-
While hitching up the Vibro Master 3000, stop the tractor and secure it from
rolling.
-
Ensure that during coupling of the Vibro Master 3000, no one is standing between
the tractor and the implement. No one should stand in the operational range of
the implement.
The three-point linkage category of the Vibro Master 3000 and tractor must match
each other. Vibro Master 3000 can be connected by category 2 + 3.
If they do not correspond, the three-point linkage on the tractor must be adjusted.
Make sure that the Vibro Master 3000 is parked on solid ground and secure it against
rolling.
−
Fit ball bushes in correct category over the pins for the lower links and the head
stock connections
−
Lower the lower links of the tractor and drive backward until the lower link hooks
are under the ball bushes
−
Raise the lift until the lower link hooks are hooked in.
−
Put in the top link
−
Secure all connections against unintentional opening
−
Make sure the hydraulic fittings are clean and connect the hydraulic hoses.
−
Connect light equipment (Optional)
−
Control no oil is leaking from hydraulic connections
−
Control all functions work correctly.
Cat. 3
– lower hole
for toplink and
outer latches for
lower linkages
Cat. 2
– inner
latches for lower
linkages
- Upper hole for
corrrect toplink
angle on large
tractors.
- Slotted / long hole
recommended for
unlevel field