18
Adjustment of the level board
Angle:
The level board has in general 2 different ways of
working:
•
Crushing (upper hole) – the board is backward
angled and clods are crushed under the board
•
Levelling – (lower hole) the board is more
vertical positioned and it has a better ability to
level out the soil surface.
To change from crushing to levelling mode:
•
Remove the bolts
•
Change the angle of the level board to match the
upper/lower hole
•
Insert the bolts and tighten again
Height:
The bracket for the level board must be positioned according to the type of tine used:
The level board sections are hung up in 2 brackets. From here the height can be
adjusted.
•
Pull out the ring clip of both pins
•
Remove the pins
•
Adjust to the wanted height
•
Insert pins and ring clips again
Adjustment of spikes on the level board:
The spikes on the level board are possible to mount in 2 height positions. From the
factory the spikes are mounted in the upper hole. When the spikes get worn they
must be moved to the lower hole.
When worn out – replace with original Kongskilde spikes.
Crushing
Levelling
Height
adjustment
S/SQ/SS - tines
VTM - tines
