Kongsberg Simrad RA83, Service Manual

Page: 34 / 210

2 - 24
93842105-00
12 BIN0- LVDS data B in 0-
13 BIN0+ LVDS data B in 0+
14 BIN1- LVDS data B in 1-
15 BIN1+ LVDS data B in 1+
16 BIN2- LVDS data B in 2-
17 BIN2+ LVDS data B in 2+
18 BIN3- LVDS data B in 3-
19 BIN3+ LVDS data B in 3+
20 BCLK- LVDS clock B-
21 BCLK+ LVDS clock B+
22 GND
23,24 N.C.
25-27 GND
28-30 +12VSC
J729: Connector for VDR
Pin No. Name Function
1 R Display unit video signal red
2 R-GND
3 G Display unit video signal green
4 G-GND
5 B Display unit video signal blue
6 B-GND
7 GND
8 H-SYNC Horizontal synchronous signal
9 V-SYNC Vertical synchronous signal
2.2.9.3 Processor Unit: POWER PCB
J601: Connector for Ship’s source
Pin No. Name Function
1-3 DC+ MAIN.F Ship’s
4-6 DC- MAIN Ship’s source -
J602: Connector for LOGIC PCB
Pin No. Name Function
1 HTON Tx power ON (=5V)/OFF (=0V or open)
control to POWER PCB
2 SCANON Scanner Unit power ON (=5V)/OFF (=0V or open)
control to POWER PCB
3 N.C. Spare
4 +12VSC +12V for scanner unit
5 GND Ground for Main PCB
6 POWER+ power switch for POWER PCB
7 POWER- power switch for POWER PCB
* Shorting POWER+ and POWER- to ON
* Keep shorting more than 3 seconds to OFF
8 MVM Motor power monitor
9 HTM Tx power monitor
10 N.C. Spare
11,12 +40V +40V for motor power PCB
13,14 +40V-R +40V return for motor power PCB
15 +24V +24V power for Main PCB
16-19 +5V +5V power for Main PCB
20-23 +12VD +12V power for Main PCB
24 -12V -12V powers for Main PCB
25-30 GND Ground for Main PCB