32
484164/A
Related topics
Preparations, page 22
Transducer installation principles, page 27
Transducer installation in keel box
Vessels with a keel box may use this for transducer installation. The keel is already the
deepest part of the vessel. If the keel is too narrow to accommodate the transducer, it can be
widened, either symmetrically or to one side only. If the keel width is increased to one side
only, the installation principle could also be regarded as a blister merged into the keel.
Example
A
Keel box
B
Mounting frame
C
Clamping frame
D
Bushing
E
Cable service loop
F
Cable in steel conduit
G
Water
H
Drainage hole
Using the clamping and mounting frames
This transducer is designed to be mounted using a clamping frame and a mounting frame.
The mounting frame is welded to the hole prepared for the transducer. Screws through the
clamping frame into the mounting frame secure the transducer in place.
Simrad CP200-5C Installation Manual
Summary of Contents for Simrad CP200-5C
