Kongsberg RADius 1000, Installation Manual

Page: 21 / 64

RADius 1000 Installation Manual, rev. 5 Installation
11
3.2 Logistics
WARNING!
The RADius 500 contains a lithium battery inside the equipment
housing. The battery is completely covered by the transponder
housing and is watertight. Unless severe damage is made to the
housing there is no risk of explosion or fire. See
Appendix E -
Transportation for labels and symbols on equipment package.
To avoid possible fire, explosion, leakage or burn hazard do not
open the sealed unit. Do not attempt to recharge, disassemble,
heat above +75
°
C / 167 F or incinerate.
Caution! The RADius 500 battery cannot be recharged and an attempt to do so
could result in a hazard. (Battery terminals are not accessible unless the
cover is destroyed or removed).
Inspect equipment for possible physical damage before installation. Make sure that no
damage is made to the cover of the RADius 1000 Interrogator unit, the RADius 600
Transponder and the RADius 500 low power.
WARNING!
Defective cover, exposing battery, on RADius 500 may be
hazardous
.
Safety: General safety guidelines to be followed when working in mast and on deck. See note
on battery in Appendix E - Transportation in this manual.
Personnel qualifications: Trained electrical workers.
Minimum number of personnel: 2, especially when mounting the Interrogator Unit to rail or mast.
Ship location: None.
Special tools required: None.
Note! Keep the original packaging (at least) for RADius 500. The package is equipped
with transport labels specific to content (lithium battery).