Kongsberg EM 2040C, Maintenance Manual

Page: 107 / 124

378511/A
105
Note
Do not use excessive amounts of water. The unit may include parts that are not
water tight.
2 On completion, dry the unit thoroughly.
3 Inspect all surfaces for signs of corrosion, flaking, bubbling paint, stains etc.
4 Clean damaged or suspect areas, prepare and preserve these areas using the correct
preservation mediums.
5 Wipe clean all exposed cables, and check for damage.
If a cable shows signs of wear or ageing, contact Kongsberg Maritime for advice.
6 Secure and protect loose parts (shock absorbers, plug and sockets, protruding
objects etc).
7 If the mechanical unit shall be sent to storage or shipped, spray it externally using a
corrosion inhibitor (for example a light oil) prior to packing.
8 If relevant, place a suitably sized bag of desiccant material (silica gel or similar)
into the to storage/transport box to keep the components as dry as possible.
Equipment handling