background image

5. 

The telephone company may make changes in its facilities, equipment, operations, or procedures that could affect the operation of the equipment. If this happens, the telephone
company will provide advance notice in order for you to make necessary modifications in order to maintain uninterrupted service.

 

6. 

If trouble is experienced with this equipment, please contact the service center for repair and/or warranty information. If the trouble is causing harm to the telephone network, the
telephone company may request you to remove the equipment from the network until the problem is resolved. User repairs must not be made, and doing so will void the warranty.

 

7. 

This equipment cannot be used on coin service provided by the telephone company. Connection to party line service is subject to state tariffs. (Contact your state public utilities
commission for information.) If so required, this device is hearing-aid compatible (EAC).

Table of Contents

Chapter 1
Getting started                                        4

Unpacking

4

Preinstallation guidelines

4

Chapter 2
Installation                                               4

Connection procedures

4

Chapter 3
Telephone Level switch

                         

5

Overview

5

Switch settings

6

Chapter 4
Sending data and faxes                         10

Autodialing data and fax calls

10

Dialing data calls manually

11

Dialing fax calls manually

12

Chapter 5
Receiving data and faxes            12

Receiving a data file

12

Receiving a fax document

13

Chapter 6
Operating tips                                         13

Powering the KONEXX Office  Konnector

13

Telephone Level switch

14

Tone dialing

14

V.90 connections

14

Speakerphones

14

Princess and Trimline telephones

14

Hanging up the modem

14

“No Dial Tone” error message

14

Autodialing

15

Calling Technical Support

15

Chapter 7
Specifications                                         16

Operating specification

16

Performance specifications

16

Chapter 1

Summary of Contents for Office Konnector

















Reviews: