background image

                                                                       

2

-----------------------------------------------------------------------------
change station 401                                            Page   2 of   5
                                     STATION
FEATURE OPTIONS
       LWC Reception: msa-spe            Auto Select Any Idle Appearance? n
       LWC Activation? y                       Coverage Msg Retrieval? y
       CDR Privacy? n                           Auto Answer: none
       Redirect Notification? y                Data Restriction? n
       Per Button Ring Control? n          Idle Appearance Preference? n
       Bridged Call Alerting? n
       Active Station Ringing: single       Restrict Last Appearance? y

       H.320 Conversion? n

                                             Audible Message Waiting? n
                                             Display Client Redirection? n
                                             Select Last Used Appearance? n

-----------------------------------------------------------------------------
change station 401                                            Page   3 of   5
                                     STATION
 SITE DATA
       Room:                                            Headset? n
       Jack:                                              Speaker? n
       Cable:                                            Mounting: d
       Floor:                                             Cord Length: 0
       Building:                                         Set Color:

ABBREVIATED DIALING
      List1:                    List2:                    List3:

BUTTON ASSIGNMENTS
 1: call-appr                            6:
 2: call-appr                            7:
 3: call-appr                            8:
 4:                                      9:
 5:                                     10:

Summary of Contents for DWIatt2















Reviews: