KONE ReSolve 200
Installation Instruction
8 (258)
AM-10.65.001
(D) 2013-04-17
© 2009 KONE Corporation
All rights reserved.
GENERAL
This installation method is designed to guarantee not only the working efficiency but also the
safety of the fitter and other people in the building.
This manual includes several variations for the elevator configuration, but on site is delivered
only the pages that suit the actual installation. The selected variation is depending on:
•
Machine room position
•
Drive type
•
Door type
•
Position of the limit switches (on the car or in the elevator shaft)
•
Local options
Follow
the method that is described in the
documentation delivered on your site
. Do not
make your own short cuts of the method. Do the installation in the same order as described in
the instruction that you get for each job.
Validity
This instruction is valid for installations of elevators with KCE electrification and V
3
F10 drive.
In case of alternatives in the described method, select the correct way according to the
location of the site.
Installation method
With this installation method, it is possible to:
•
Identify easily the equipment in the packages. The material is grouped together according
to different phases and work places.
•
Wire and connect easily, without the circuit diagram.
•
Know the future phases of work and if necessary, to arrange the assistance of another
technician.
If there are several MMS packages, the best moments to install them are:
Phase
MMS package
Phase 14:
New car interior
New car door
New signalization in car
Phase 5:
New machinery
Phase 12:
New landing signalization
