Innovative technology only for a better vision world
Hunan Bowan Technology Co.,Ltd.
98
3.46Cut
4.48.1Instructions
The cut function can intercept a part of the material for display according to
requirements. Currently, it supports two cut modes: stretch and no stretch:
1. When stretch is checked, the cropped material will be enlarged and
displayed on the whole window.
2.When stretch is not checked, the cropped part will not be output, and the
uncut part will be displayed normally with the same scale and position.
4.48.2Intructions
1. Select the layer you want to change
2. Find the cut function in the parameter settings, check the stretch or not stretch boxes
3. Select the by scale or by pixel
4. Set the value according to the requirements and complete the setting