Komatsu SK820-5 turbo, Operation & Maintenance Manual

Page: 128 / 244

HOW TO LIFT THE MACHINE
126
3.10 HOW TO LIFT THE MACHINE
DANGER
q
To lift the machine use sufficiently dimensioned cables; do not use worn cables or cables with broken
strands.
q
Do not lift the machine with the operator on board and make sure that no one is approaching the machi-
ne before lifting it.
q
Before lifting the machine, make sure that the eye bolts are correctly fixed to the cab roof.
IMPORTANT
q
The owner of the machine is responsible for installing
the eyebolts correctly on the cab roof.
q
Use only eyebolts homologated by Komatsu for this
specific type of machine.
q
Homologated eyebolts must be requested to Komatsu
Spare Parts Dpt., specifying the machine model and se-
rial number.
To lift the machine, proceed as follows:
1 - Lower the loader arm to the ground and fold the bucket
completely.
2 - Shift the safety bars to the lock position and stop the engi-
ne.
3 - Insert metal or nylon ropes in the four eye bolts on the cab
roof and fix with the appropriate retainers or safety pins.
4 - Connect the ropes to the upper lifting bar as indicated in
the figure.
IMPORTANT
q
Always use the four coupling points provided for the lift-
ing of the machine.
5 - Lift slowly until the ropes are tensioned and make sure
that the machine is fastened correctly before lifting it.
CAUTION
q
When lifting the machine, make sure that it is correctly
balanced and that it can be lifted horizontally.
q
Do not lift the machine with optional equipment installed
on it.
RWA37470