Komatsu PC14R-3, Operation & Maintence Manual

Page: 76 / 246

INSTRUMENTS AND CONTROLS
74
WEAM009300
2. - 3. Work equipment control levers
WARNING
q
Before carrying out any manoeuvre with these levers, the
operator must seat in the work position and fasten the seat
belt.
q
Before leaving the driver seat, lower the equipment to the
ground, lock the controls with the safety lever and stop the
engine.
IMPORTANT
q
The horn push button is positioned on the right lever grip
and must be used to warn all the people in the vicinity
before starting work and in case of danger.
q
When the safety lever is in the “locked” position, all the
movements are inhibited (see "3.2.3 pos. 1. Safety lever
(control locking lever)").
The control lever (2) is positioned on the operator’s left and
controls the arm and the turret swing.
q
Swing function
(a) Swing to the right
(b) Swing to the left
q
Arm
(c) Fold
(d) Extend
N (Neutral): the turret and the arm are held in the position where
they stopped.
The control lever (3) is positioned on the operator’s right and
controls the boom and the bucket.
q
Boom
(e) Lift
(f) Lower
q
Bucket
(g) Open
(h) Fold
N (Neutral): the boom and the bucket are held in the position
where they stopped.
RKA22550
RKA16610
RKA16230
RKA16240