Komatsu PC14R-3, Operation & Maintence Manual

Page: 109 / 246

USE OF THE MACHINE AND RELATED CONTROLS
WEAM009300
107
SEAT BELT
WARNING
q
Before fastening the seat belt, make sure that the fastening brackets or the belt itself do not show any
anomaly. If there are damaged or worn parts, change the belt.
q
In any case, change the seat belt every 3 years, even if it seems to be in good conditions. The date of
manufacture is indicated on the reverse side of the belt.
q
Adjust and fasten the seat belt before operating the machine.
q
Always fasten the seat belt when working with the machine.
q
Make sure that none of the two parts of the belt is twisted.
Make sure that the screws that fasten the belt to the frame are not loose. If necessary, apply a tightening torque of
24,5 ± 4,9 Nm (2,5 ± 0,5 kgfm).
If the surface of the belt is damaged or if the couplings are broken or deformed, change the belt assembly.
Fastening and unfastening the seat belt
1. Adjust the seat in such a way as to ensure that there is
sufficient knee room when pressing the pedal thoroughly
while seated, with the back resting against the backrest.
2. After adjusting the seat, seat correctly and insert the tang (2)
in the buckle (1). Pull the belt to make sure that the tang is
securely locked in the buckle.
3. To unfasten the belt, lift the upper part of the buckle (1) and
release it.
Fasten the belt without twisting it. Adjust the belt length by
proceeding as indicated below.
ADJUSTING THE SEAT BELT
How to shorten the belt
Pull the free end of the belt on the tang side.
How to lengthen the belt
Pull the belt, keeping it perpendicular to the tang.
RKA22870