GUIDANCE TO RECOMMEND SHIFTING UP
Even when the engine speed reaches shift up speed during
traveling, if the upshift disable condition by gear shift lever con-
tinues for 5 seconds or longer, the upshift recommendation
message is displayed on the machine monitor.
This message is as well displayed when the machine travels in
reverse. It is, however, not displayed when the machine travels
downhill with retarder operation.
When traveling on a flat road, reduce the fuel consumption by
shifting up the gear and decreasing the engine speed.
The upshift recommendation message goes out automatically
after 10 seconds.
GUIDANCE TO AVOID ACCELERATION OPERATION DURING DUMP BODY
LOWERING
If you depress the accelerator pedal for more than 5 seconds
while the dump body is lowering, the message to restrict the
accelerator operation during the dump body lowering operation
is displayed on the machine monitor.
When the dump body is lowering, restrict the accelerator oper-
ation in order to reduce the fuel consumption.
The message to restrict the accelerator operation during dump
body lowering operation goes out automatically after 10 sec-
onds.
GUIDANCE TO AVOID STEERING RELIEF
If the steering oil pressure is relieved for more than 10 sec-
onds, the steering relief restriction message is displayed on the
machine monitor.
Relieving of steering oil pressure occurs when you steer the
wheel fully to the right or left.
Restrict the forcible steering operation to reduce the fuel con-
sumption.
The steering relief restriction message goes out automatically
after 10 seconds.
REMARK
Display/non-display of ECO guidance can be switched.
METER DISPLAY
SPEEDOMETER
The speedometer indicates the travel speed of the machine.
OPERATION
EXPLANATION OF COMPONENTS
3-41
Summary of Contents for HD465-8
