• On “Operator ID Change” screen, if you press ENTER
switch (4) after inputting the ID which is not registered,
a message is displayed at the bottom and the screen
changes to “Monitor Setting” menu screen and the ID
number is not changed.
• On “Operator ID Change” screen, if no switch is oper-
ated for 30 seconds or longer, the screen changes to
“Monitor Setting” menu screen and the ID number is
not changed.
WHEN OPERATOR IDENTIFICATION FUNCTION IS AVAILABLE WITHOUT SKIP
When the operator identification function is available without
SKIP, the identified ID number is not displayed in the “Operator
ID” column of “Monitor Setting” menu screen.
1.
Select “Operator ID” on “Monitor Setting” menu screen,
then press ENTER switch (4) for 1 second.
2.
“Operator ID Change” screen is displayed.
REMARK
When the ID change is not necessary, press RETURN
switch (3).
• Input the already registered ID on “Operator ID
Change” screen by using the numeric keypad (6), and
press ENTER switch (4).
A message is displayed below, the screen returns to
“Monitor Setting” menu screen, and the identified ID is
changed.
EXPLANATION OF COMPONENTS
OPERATION
3-94
Summary of Contents for HD465-8
