REMARK
• Immediately after turning the starting switch to ON position and during the engine is running, DEF level cau-
tion lamp (1) lights up in white. However, this does not indicate abnormality.
• In cold weather, DEF level cannot be detected and DEF level caution lamp (1) lights up in white for approxi-
mately 1 hour. However, this does not indicate abnormality.
• Even if DEF level caution lamp (1) does not light up in white, it may take a long time for DEF level gauge to
display the correct position.
Note that the following cases are not abnormal:
• When DEF is added while the starting switch is kept at ON position.
• When the starting switch is turned to ON position immediately after adding DEF (within approximately
30 seconds).
Before adding DEF, turn the starting switch to OFF position. Wait for a while after adding, then turn the
starting switch to ON position.
MONITOR SWITCHES
1. Function switch
2. Operation mode selector switch
3. Buzzer cancel switch
4. Gear-shift mode selector switch
5. Work equipment automation switch
6. Customize switch
7. Reverse travel slow mode switch
8. Air conditioner switch
FUNCTION SWITCHES AND GUIDANCE ICONS
• Function switches (1) at the bottom of the monitor display
consist of 6 switches (F1 to F6). The function of each
switch differs according to the content of each screen.
• The function of switches (1) on each screen can be con-
firmed by guidance icons (2) displayed on top of the
switch.
• While guidance icon (2) is not displayed, switch (1) does
not function even if it is pressed.
• Even if guidance icon (2) is pressed, it does not function.
Press function switch (1) directly under guidance icon (2)
to operate the function.
OPERATION
EXPLANATION OF COMPONENTS
3-41
Summary of Contents for D155AX-8E0
