9 頁
10 頁
6-5. Setting the Clock
6-6. Eyesight Adjustment
YELLOW battery level display icon is a warning
SD CARD ICON
Indicates the SD memory card status.
（
The SD card is not recognized if there is no icon.
）
VIDEO FILE ICON
Indicates the current VIDEO QUALITY setting
（
H/S/L
）
and the total number of
video files currently stored on the SD memory card.
PHOTO FILE ICON
Indicates the current PHOTO QUALITY setting
（
H/S/L
）
and the total number of
photo files currently stored on the SD memory card.
Press the MENU SELECT button while looking at the VIEWFINDER or the HDMI monitor (if connected)
to display the SETUP MENU PAGE 1/4 on the screen.
Press the MENU SELECT button again to display PAGE 2/4 on the screen.
Select DATE & TIME ADJUST on that page and press the MENU SELECT button.
➡
See the description of the setup menu on P17 for details.
This product utilizes a rechargeable backup
battery. If the camera is not connected to power
for an extended period of time the clock will revert
to factory setting.
Press the MENU SELECT button to display the SETUP MENU PAGE 1/4 on the screen.
While looking through the VIEWFINDER, manipulate the DIOPTER ADJUSTMENT LEVER until
the menu icons and text appear clearly.
➡
The battery is nearly empty.
RED
battery level display icon
➡
The camera will automatically shut down
when the battery voltage is too low.
Please exchange the battery.
RED
battery level display icon
➡
The battery is faulty. Please replace the battery.
8
9
FULL
EMPTY
NG
NG
SD memory card is Write Protected
Files may be played back, but you won’t be able to record.f
In order to record, remove the SD card, move the lock switch to the OFF position and re-insert.
STEADY ON
SD memory card has not been formatted or is in an abnormal state
SD memory card is being recognized
Format the SD memory card in the camera
（
See
P20 for MENU
PAGE 4/4 details
）。
If formatting the SD card does not change the display, replace the SD card.
If the SD card has already been formatted, ejecting and then re-inserting the SD card may help.
FULL
EMPTY
FLASHING
WP
WP
BATTERY LEVEL DISPLAY
SD CARD CAPACITY DISPLAY
➡
➡
ASST SELECT
MENU SELECT
VIEWFINDER
DIOPTER
ADJUSTMENT
LEVER
PLAY/REC SELECT
HDMI OSD SELECT
6-7. IR Switching mode
1. What is IR mode?
It is an image capturing mode to take IR image in monochrome using IR illuminator under close to pitch black.
Image capturing in color is made under visible light between 380nm and 780nm wave length.
In case of IR mode, it captures invisible light between 780 and 1,000 wave length.
IR mode image capturing is useful for law enforcement and military applications.
2. Setting up IR mode image capturing mode.
①
Shift the IR switching lever to IR position.
②
Make sure if the image in the viewfinder is turned into monochrome.
③
Now you are ready to shoot under IR condition.
[Note] The camera is set up to Color mode at the time of ex factory.
[Note] In case of IR image capturing, use IR illuminator (option)
The following two types are available in the market.
IR illuminator for 850nm: Light source is recognizable in red.
IR illuminator for 940nm: Light source is not recognizable.
3. Recording IR image
You will see the IR images in the viewfinder in monochrome which will be recorded into SD card or will be
output to HDMI port in monochrome.
Color Mode
IR Mode
(with IR illuminator)
Image in color mode
Image in IR mode with IR illuminator
IR Mode switching lever
IR Mode switching lever
