DIVISION (x2)
Division output; square wave signal with 50% duty cycle
EXT. CLOCK
CV input that accepts any rising edge trigger or gate
LFO SPEED
CV input (0 – 5V) to control the rate / division of the LFO
LFO RESET
Trigger/Gate input that resets the LFO on the rising edge
ENV
CV output of the envelope signal (0 – 7.6V)
ENV INV
CV output of the inverted envelope signal (7.6V - 0V)
ENV GATE
CV input for an external envelope gate or trigger
LFO
CV output for the LFO signal (0 – 7.6V)
LFO INV
CV output for the inverted LFO signal (0 – 7.6V)
LFO SYMM
CV input for controlling the symmetry of the LFO waveform
SENSOR
CV output (0 - 8V) of the onboard motion sensor for usage with CV inputs on the
pedal, other KOMA Elektronik pedals or other voltage-controlled devices
All patch bay inputs and outputs are mono ¼ inch phone jacks.
BACKPANEL
DC POWER INPUT
Accepts standard BOSS style 9V power adapters, center polarity negative, 500mA
min. (KOMA Elektronik power adapter included)
CV ATTENUATORS
The sensitivity of the CV inputs can be attenuated with trimmers on the back.
DIN/MIDI IN
Combined DIN Sync / MIDI input
MIDI OUT
MIDI Output
DIN OUT
DIN Sync out
MIDI TRHU
MIDI Thru provides the unprocessed MIDI signal present at the DIN/MIDI IN jack
EXT SYNC
CV Input for an external gate or trigger to externally start/stop the RH301 in the
different operating modes.
KOMA Elektronik RH301 – Rhythm Workstation / Utility Tool
Page 18
