T
ECHNICAL
S
PECIFICATIONS
GENERAL
Casing:
Powder coated aluminum casing, silk screened text and wooden side panels
Dimensions:
23 cm x 20 cm x 5 cm (L x W x H)
/
9
″
x 9.8
″
x 2
″
(L x W x H)
Net. Weight:
1000 gr
/
2.2 lbs
Shipping Weight:
1.5 kg.
/
3.3 lbs including power adapter and this instruction manual
Power requirements: 9V DC power adapter, 500mA min, center polarity negative (only use the KOMA
adapter shipped with the pedal)
FEATURES
TEMPO
Rotary control to set the tempo in Free mode
DIVISION
Rotary switch to select one of 9 divisions/multiples of the master clock signal
SOURCE SELECT
Slide switch to select the master clock sync source (Tap – Free – MIDI / DIN
Sync / external analog clock synchronization
RATE
Rotary control to change the speed / division of the LFO
SHAPE
Rotary switch to change the basic waveform of the LFO. Available waveforms are:
Sine – Triangle – Square – S&H - Noisine
SYMMETRY
Rotary control to change the symmetry of the LFO waveform
LFO MODE
Slide switch to chose between synced or free running mode for the LFO
ATTACK
Rotary control to set the attack time of the envelope
DECAY
Rotary control to set the decay time of the envelope
SUSTAIN
Rotary control to set the level of the envelope while the gate is high
RELEASE
Rotary control to set the release time of the envelope
RANGE
Rotary control to change the time range on the A, D and R stages. By turning this
knob clockwise the envelope becomes slower and fades from a snappy linear to a
logarithmic behavior
ENVELOPE MODE
Slide switch to chose between master clock sync – division sync – free running
mode
MASTER TEMPO LED LED ring around the Tap/Start/Stop button
LFO LED
LED indicator to display the LFO
ENVELOPE LED
LED indicator to display the envelope
LARGE BLACK
BUTTON
Acts as a tap button in Tap mode or as Start / Stop in the other master clock
modes
2 IR EMITTERS, 1 IR
RECEIVER
Calculates the distance between an object and the pedal and generates a CV signal
according to the measured distance. The CV output of this sensor appears as a CV
output on the patch bay, from where you can route it to the CV input of your
desired, to-be-modulated feature
PATCH BAY INS AND OUTS
CLOCK (x2)
Master clock output; square wave signal with 50% duty cycle
KOMA Elektronik RH301 – Rhythm Workstation / Utility Tool
Page 17
