Kollmorgen EB-10 Series, Instruction Manual

Page: 6 / 96

Goldline EB Instructions | 1 English
1.2 Safety
This section helps you to recognize and avoid dangers to people and objects.
1.2.1 Important Notes
This Section helps you to recognize and avoid dangers to people and objects.
1.2.1.1 Special Staff Required
Only properly qualified personnel are permitted to perform such tasks as transport, assembly,
setup, and maintenance. Qualified specialist staff are persons who are familiar with the transport,
installation, assembly, commissioning, and operation of motors and who bring their relevant
minimum qualifications to bear on their duties:
l
Transport: only by personnel with knowledge of handling electrostatically sensitive
components.
l
Mechanical Installation: only by mechanically qualified personnel.
l
Electrical Installation: only by electrically qualified personnel.
l
Setup: only by qualified personnel with extensive knowledge of electrical engineering and
drive technology
The qualified personnel must know and observe IEC 60364 / IEC 60664 and national accident
prevention regulations.
1.2.1.2 Read The Documentation
Read the available documentation before installation and commissioning. Improper handling of the
motor can cause harm to people or damage to property. The operator must therefore ensure that
all persons entrusted to work on the motor have read and understood the manual and that the
safety notices in this manual are observed.
1.2.1.3 Pay Attention to Technical Data
Adhere to the technical data and the specifications on connection conditions (rating plate and
documentation). If permissible voltage values or current values are exceeded, the motors can be
damaged, for example by overheating.
1.2.1.4 Perform Risk Assessment
The manufacturer of the machine must generate a risk assessment for the machine, and take
appropriate measures to ensure that unforeseen movements cannot cause injury or damage to any
person or property. Additional requirements on specialist staff may also result from the risk
assessment.
1.2.1.5 Transport Safely
Lift and move motors with more than 20 kg weight only with lifting tools. Lifting unassisted could
result in back injury.
6 Kollmorgen | kdn.kollmorgen.com | August 2021