AKI-CDB-MOD-07T | SAFETY PRECAUTIONS
•
Make sure that the voltage and polarity of the power source is correct before connecting the HMI
panel to the power outlet.
•
Peripheral equipment must be appropriate for the application and location.
2.4
During Use
•
Keep the HMI panel clean.
•
Emergency stop and other safety functions may not be controlled from the HMI panel.
•
Do not use excessive force or sharp objects when operating the touchscreen.
2.5
Service and Maintenance
•
Only quali
fi
ed personnel should carry out repairs.
•
The agreed warranty applies.
•
Before carrying out any cleaning or maintenance operations, disconnect the equipment from
the electrical supply.
•
Clean the display and surrounding front cover with a soft cloth and mild detergent.
•
Replacing the battery incorrectly may result in explosion. Only use batteries recommended
by the supplier. During the warranty period, the battery needs to be replaced by an authorized
Kollmorgen service center.
2.6
Dismantling and Scrapping
•
The HMI panel or parts thereof shall be recycled according to local regulations.
•
The following components contain substances that might be hazardous to health and the
environment: lithium battery, electrolytic capacitor and display.
2.7
Appearance of Air in Touch Screen
The layer structure of the touch screen contains air and in rare cases appearance of bubbles can
arise. This is purely cosmetic and does not affect any functionality of the HMI panel. The appearance
can occur under certain environmental conditions such as temperature, humidity, and atmospheric
pressure.
ky
Kollmorgen | October 2014
7
