Kolin KAG-110RSINV, User Manual

Page: 11 / 31

- 8 -
Notes for installation
Remove
Noise
Electric wiring
Before removing air conditioner to the other place, you
Then it must be done under the direction of the profe-
ssional technician. In addition, the charge of this must
be paid.
enlargement of noise and vibration.
● Don’t put anything in front of the outlet of the unit
to avoid increasing noise.
● Be sure that hot air or noise will not inconvenience neighbors.
● Please contact the seller as soon as
there is strange noise during operation.
● Please use the safety support.
● Must connect with ground reliabl
y.
●
The exclusive circuit must be used. But removable socket
can’t be used because poor contact of it can cause over heat
● Don’t pull the power cord strongl
y.
and leakage current is less than 30mA.
● Connecting method between air con
d
itioners and power cord and intercon-
necting method of each individual ele
ment with one another should accord
with wiring diagram on the unit.
●
The air conditioner should be installe
d in accordance with national wiring
regulation.
●
An all-pole disconnection
sw
itch having a contact separation of at least 3mm
● Air switch (thermal-magnetic breaker
) should be installed in the circuit.
● If the supply cord is damaged,it must be replaced by the manu
facturer or
●
All The dectrical
w
ork must be done according to the local
w
iring regulations.